Star Wars T1 Jedi Shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a T1 Jedi Shuttle from Star Wars: The High Republic
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The T1 Shuttle was used by the Jedi during the High Republic Era. It is an early predecessor of the T6 Jedi Shuttle from The Clone Wars.
The scale should be around 1:270. I couldn't find much on its canon dimensions, so I've scaled it to about the same size as a Lambda-Shuttle. The model is 135.1mm wide, 70.5mm long and 20.5mm tall. It has a hole at the bottom which fits a big pin and base.
I've used images from the High Republic Comic and from “The Art of Star Wars The High Republic” to create this model. There were several inconsistencies between these images and I've employed some degree of creative freedom to resolve them.
Print Instructions
Printed at 0.15mm layer height. Requires supports on buildplate.
For Light and Life.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#