1 / 5
Zipper PIP remix von lobocnc and joseph fisher
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't print.Reisverschluss komplett funktionsfähig. Bag zipper some error are in this. Don't print.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (14)Powiązane
Don't print it there a few Errors.
its bigger than zippy bag clip and classic zipper to fit the split pins. (150%)
From LoboCNC and Joseph Fisher. Its sliced with bambustudio and include some suport.
It is a pain to remove the suport ,and if you move the part to mutch it will break the pins. I printed it in PLA+ in grey . Perhaps it will last longer in ABS .