1 / 5
Ender 3 (Pro) Power Supply Fan Silencer / Cover — zdjęcie 1
1 / 5

Ender 3 (Pro) Power Supply Fan Silencer / Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed from timqui's cover to replace the large rounded edges with chamfers for a much cleaner print.

Ocena
5 / 5
Polubienia
55
Pobrania
329
Wydruki
8
Wyświetlenia
1208
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Remixed from timqui's cover to replace the large rounded edges with chamfers for a much cleaner print and a version without the central hole. This style does not make the fan silent, but does seem to reduce some frequencies enough to make it more tolerable.

Supports should only be required for the mounting tabs. Ensure your slicer overhang threshold is set to avoid generating supports around the perimeter (support overhang angle to 50 in Cura I believe).

Be sure to only have one screw removed at a time. The fan will fall down into the power supply if both screws are removed.

Mirrored alternative versions are included for some Ender 3 Pro models with a rotated hole pattern.

Tagi