Moana Glowing Heart of Te Fiti
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light w/ an on/off switch.
- Ocena
- 4,833 / 5
- Polubienia
- 314
- Pobrania
- 1544
- Wydruki
- 17
- Wyświetlenia
- 10 083
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light with an on/off switch that I had around the house, but can also be purchased online. There's also a necklace holder the heart snaps into that's inspired by the one in the movie.
Items needed in addition to printed parts:
(4) M2x6 Screws
(1) Battery-operated fairy lights. The following looks like what I used: https://www.amazon.com/Firefly-Battery-Operated-Christmas-Decorations/dp/B07QYS8Q82/ref=sr_1_19?dchild=1&keywords=liidia+fairy+string+light&qid=1622859421&s=home-garden&sr=1-19
You'll need supports for all 3 parts. For the necklace part, I recommend orienting the loop end to the bed for a better finish on the open-ended curved edges. Good luck on the prints!
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
25
Filament: Hatchbox PLA Green
