Loving 4 Leaf Clover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 Leaf Clover with heart shaped leaves suitable for filament color changes
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lucky 4 leaf Clover split into parts for easier printing. Print HeartCloverA and HeartCloverB and glue together being sure to align the notch for the HeartCloverPeg. Use the HeartCloverPeg to help attach the assembled clover to the HeartCloverStem. This works well with color filament swaps around layer 30 when printing at .2 layer height. The model prints well at 50% normal size if you need something smaller. I used 80% infill for the base to make it more stable. I used no infill for the clover. It printed a little ‘messy’ on the interior without infill, but none of that is visible when the print completes. I also only used 2 bottom layers for the main clover since the bottoms are glued together. The assembled clover fits fairly snug in the stem, but it can be glued for something more permanent.