Nuki Smart Lock Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for Nuki Smart Lock. Much better hold due to larger adhesive surface.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 319
- Wydruki
- 1
- Wyświetlenia
- 2446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you stick your Nuki Smart Lock on a protective rosette of your door lock, the connection of Nuki and the lock is very weak. When turning the key, too high forces act on the small adhesive surface and it will not hold in the long run. I have already locked myself out twice because of this.
With this spacer for Nuki Smart Lock the adhesive surface is duetly increased and improves the hold enormously.
The depth of the spacer is 9.4mm. You can easily adjust it to your requirement in the slicer.
Printing information
Layer height: 0.20mm
Infill: 15%
Support: none
I am looking forward to your Makes! :-)
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.
The following filament was used in the pictures above:
- Extrudr PLA NX2 White