Dual tactical rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The dual tactical rail mount is a nerf attachment designed so that you can attach two nerf guns together (shown are my…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 935
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The dual tactical rail mount is a nerf attachment designed so that you can attach two nerf guns together (shown are my modified Perses and Knockout). I have wanted an attachment like this since before I started printing and I wanted to share it with people so I can see more fun multi-blaster mods.
Print instructions
I printed this at .3mm layer height and it works well. Insert the nerf screws carefully or you could break the 3D printed part. Also when screwing onto a nerf gun don't screw it in too far or it will possibly break the rail on the blaster. If using this on a rival blaster combo you can place the screw in between the sections of rail so that it probably won't damage anything.