Parametric USB SD microSD card organizer holder by mbrami on Thingiverse-FreeCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This system is just the thing for storage of varied numbers of the three types of SD storage forms.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of locations being selectable parametrically via OpenSCAD. I have included the images that mbrami posted as well as my pictures. I felt that the 2mm thick sides were a bit too large so I reduced them to 1.2mm, and reduced the corner radiuses to 1.5mm to eliminate the overhang issues on the bottom.