Wyze Cam V3 Outdoor Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outdoor housing for Wyze Cam V3
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Wanted to put some sort of camera outside hanging off of my roofs awning and the Wyze cam V3 seemed to be a good choice as the color night vision looked very crisp and the device itself is already weather resistant. Its also a bonus that each camera is only 35 bucks and can record for about a week with a $10 SD card.
Looked for a file to make the camera a little more outdoor friendly and couldn't find much so decided to whip up my own. Designed for and printed out of ASA/ABS, made to be as easy as possible to print. May be [slightly] too large if printed out of a low temp material like PLA, but interior can easily be shimmed with paper/tape/etc.
BOM:
(4X) M3x5x4 Heatset Inserts
(2X) M3x25 SHCS
(2X)M3x40 SHCS - or - (2X) M3x25 for a total of 4 if visor is not used
- Daytime and nighttime photo shown for reference from a 3rd story roof.
- Screwing in the mount to the house can be tricky with the visor in the way, but is definitely possible, it just needs to be done at a bit of an angle