Anycubic Photon Mono X Resin Bottle Reservoir
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Mono X bottle fed resivior
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a redesign of a resin reservoir made by Matteo Cibelli. I replaced to top of his vat with a threaded portion to put a standard Anycubic resin bottle on. To create the air tight seal i sed 2 silicone o-ring around the neck of the bottle. I designed a cap to be held on with a rubberband for when the reservoir needs to be taken out of the vat.
EDIT added a small stud to hold the rubber band for the cap from slipping.
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Anycubic Resin Gray
Category: 3D Printer Accessories