Team Assocated B6.4 Tower Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am working on finishing the design and validating fitment for this part, please read the description for details
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 553
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This was designed to fit the B6.4 Kit towers
Parts should be printed solid in TPU for best results.
I added a v2 model and removed the v1. There was a wall too thin to print properly with a 0.4 nozzle.
Also added a lightweight model that doesn't cover the screws in case you use screws with a taller head than normal or don't mind the look to save a little weight, a regular version but cut out so you can access the screws without having to remove the guard and a wider version of the original and open front to add some materiel to the walls below the screws.