1 / 1
Longer arm to clear ARC enclosure acrylic panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added 4mm to the rear portion length to clear the acrylic panel of the ARC enclosure for the P1P, no insert
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Remix of the fantastic remix by bgreat adding 4mm of length to clear the acrylic cover on the ARC enclosure. The original made it past the case cover corner, but not the extra 3mm for the acrylic sheet on the outside, this remix adds the necessary length to work with the shell and acrylic in place. This version does not require a threaded insert, an M4 screw can be directly screwed into it.
