Dock for Apple Watch (All Generations) and AirPods Pro (All Generations)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few months ago I made a dock for my Airpods and Apple Watch. This is a new version of this model!
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 764
- Wydruki
- 3
- Wyświetlenia
- 6483
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the new version of my AirPods Pro dock and Apple Watch charger. Supports are only needed fot the parts that are touching buildplate. A layer height of 0.24 is recommended, you shouldn't go higher than that. I printed it with a 0.5mm nozzle, 0.4 should work too.
The dock can be used with any generation Apple watch. It also fits the AirPods Pro Gen 2 and every generation of Apple watch. The size of the watch doesn't matter at all!
as screws you should use m4 x 8mm screws. If you don‘t have screws, you should check out my old design on my profile