Skadis Abstandshalter (größeres Senkloch) - Skadis spacer with wider countersunk hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of model from @lansolo81
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1039
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Die Abstandshalter von @lansolo81 funktionieren hervorragend. Allerdings steht der der Senkkopf der Spaxschrauben etwas über das Skadisbrett heraus. Der Remix behebt dieses kleine Manko durch ein etwas weiteres und tieferes Senkloch, das auch die Senkköpfe der 4er Schrauben fast vollständig aufnimmt. Siehe Fotos zum Vergleich. Die reinweißen Exemplare sind neuere Version.
The spacers from @lansolo81 work perfectly. However, the countersunk head of the Spax screws protrudes somewhat over the Skadis board. The remix fixes this small shortcoming by a slightly wider and deeper countersunk hole, which also almost fully accommodates the countersunk heads of the 4mm screws. See pictures for comparison. The clear whites ones are the newer version.