Live Center Holder: Updated 9/24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for mounting and storing live center ends for Robust, OneWay, Savanah, or similar ¾ x 10 live centers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated: 9/14/24. Improved thread design
I like to have various live center adapters for convenience and for fun. These help me store them next to the lathe and not in a pile in a drawer.
I recommend PETG for unconditioned shops and PLA for all else. 3 or 4 perimeters will hold up better than 2. Clearance should already be built in for a loose fit to allow for easier on and off.
There are two versions. One includes a second hole if you feel that you need to keep it from rotating. I have not had much of an issue, but wanted to provide options.
Post makes for me to see and tag me for any updates.