Dual Badge Holder - Designed For Vertical Bulk Printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple Models Designed To Print A Few Or As Many As You Want
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ID Card holder based on a classic and proven design many may be familiar with being issued within the DoD contractor fields. But sometimes getting ahold of one could be difficult. I'm listing the base version for free with lots of customized versions available for purchase with company logos over on Cults.
I have printed with PLA, which can have a shorter life due to brittleness when flexing. PETG/ABS/ASA tends to last longer given its inherent flexibility of the materials.
What You Get:
- Single Dual Badge Holder STL File
- Two Dual Badge Holders STL File
- Five Dual Badge Holders STL File
How To Print
Print vertically. PETG is my preferred material but PLA works too, but tends to be a tad on the brittle side.
The 2 and 5 pack produces better print quality as the brace design I incorporated provides greatly increased stability reducing or eliminating any wobble commonly seen when printing tall prints with small footprints with normal speeds.
Post processing is just snipping the links between the card holders off and can shave down with a razor or knife if you want a super smooth edge.