1 / 4
AA Battery Holder for DuPont jumper — zdjęcie 1
1 / 4

AA Battery Holder for DuPont jumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple but effective holder for a single AA (Mignon) battery that not need contact plates.

Ocena
5 / 5
Polubienia
93
Pobrania
606
Wydruki
8
Wyświetlenia
2223
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables.

The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this ensures that it does not get disconnected so easily.

Obviously, this model is for experimentation and is not intended for continuous use.

The original design is publicly available at OnShape

Tagi