Radiator - side panel plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of the plastic part of the radiator, that holds side panels to the core.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 166
- Wydruki
- 4
- Wyświetlenia
- 732
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After a long time of usage, the plastic parts that hold the side panels on the radiator started to fall apart so I decided to make a simple replacement.
I decided not to make the whole thin circle because it would complicate the print. Also, it would probably break pretty soon.
I printed them with PET-G because it withstands heat a little better, but any filament should work great.
It is possible to print it without supports but it left a rough finish on top of the print and it was also a little bit slower.
Hopefully, this will be useful for someone.