Felt Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added felt to the foot and used it under our chairs. Replaces our old molten plastic feet there.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The old plastic parts under our chairs not only did melt with gaining age, but also made nasty traces on our floor. Replacing them was a quick print, easy installation and really satisfying.
The “nipple” parts is 6mm wide to fit our chair's holes. The base part is 10mm in diameter and should be enhanced with a felt disc, which can be found in your local shops or online. This adds comfort and noise reduction.
If you need other dimensions, feel free to file me a comment here.
Printed in PETG for robustness. Feel free to try a PLA, but might be too brittle to sit on.