Uppercut Gun Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for YOUR Caldwell Conversion Uppercut! Remix for the awesome Uppercut designed by Aurathon. Enjoy
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 2324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This model was designed to hold the Caldwell Conversion Uppercut designed by Aurathon and to be printable on the Ender 3 V2. The base messures 400x100x20mm, but the modell has a total hight of around 180mm.
I printed everything with PLA, but PETG might also be usefull to make the Connectors. I recommend printing the modell at a layer hight of 0.2mm, an infill of around 15-20% and with supports turned on. I designed two halfes (Left Side and Right Side), which are to be connected by two Connectors. Note: try printing the Connectors and the Holder at around 98-99% scale so that they fit nicely into their holes. The Holder can be printed flat on the print bed. I have uploaded another modell for printers with bigger print beds, where the base can be printed in one piece.
My holder did not require any glue, but depending on how well your pieces fit together it might be helpfull to apply some. Let me know if you have any problems or suggestions.
Thanks again to Aurathon for the genius design.
Cheers and happy printing!