Durham Mfg Parts Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi compartment parts tray for the large Durham Manufacturing (MFG) steel drawer cabinets.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
3, 4 and 12 compartment parts tray for the large Durham Manufacturing (MFG) steel drawer cabinets. Not for small Durham cabinets.
Print 8 times to fill one drawer.
I've included the model files if you would like to remix or adjust parameters.
*NOTES*
Because this is a wide and shallow print, be sure to use gluestick on the print bed. Without glue, there is a high risk of the corners warping.
Will take 7-9 hours to print at standard speed. I print at .30mm height and increase the print speed to 130%. If using a Prusa Printer, I like to enable fuzzy skin for the outside perimeter walls.
Modeled to be a loose fit, so that there is no interference between each tray or the drawer. Stacked two trays high, there will still be clearance for the lid to close.