Ultimate MagSafe Charging Pad V2 for Rivian R1T & R1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drop in replacement for the largely non-functional stock Rivian wireless charging system.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 464
- Wydruki
- 8
- Wyświetlenia
- 3843
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike

OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no cost.
We’re here to empower the Rivian owner community by making DIY customization simple, affordable, and accessible — backed by over 5,000 downloads on our Printables page and our new low‑cost, free‑shipping Creator Kits available on our website.
And if you’re considering a Rivian R1S or R1T, you can receive up to $500 in Rivian Gear while supporting our mission of open‑source enhancements by using our Rivian Referral Rewards code: ROBERT1265188. You enter this code when putting your deposit down on your Rivian. Details are available here.
+++
Version 2 (Mk6) Uploaded
This update brings many quality-of-life upgrades to the Ultimate kit. They are:
- An updated 3D printed shelf to reduce the amount of plastic showing, especially toward the front of the vehicle / charging area. This additionally provides slightly easier access to the storage area.
- An additional 3D printed element has been added to the design which sits right beneath the liner. This new part of the shelf provides a flat area for the liner to lie on, making it fit significantly better. It is taped in place using high-quality automotive tape (not glue) to ensure easy servicing and repairability if needed.
- Revised dimensions to ensure the 3D printed shelf matches the contours of the wood or vegan leather on the outside of the charging pad, and to positively snap the entire kit into place / hold it extremely tight.
- A new mounting location for the optional OpenSourceEV Parts Power Kit It slides into place and is held there by the barrel connector it plugs into the vehicle with. There is also a cutout to make inserting the barrel connector easy.
- Tiedown points have been added to the underside of the shelf. These are sized perfectly to use the twisty-ties of the JSAUX charging pads and allows you to easily coil up the excess cabling and keep it out of the way.
Version (Mk5.11) Uploaded
This release is corrects an issue with the spacing around the charging pads. It's strongly recommended that you use this instead of Mk5.9. Otherwise, the models are identical.
Version (Mk5.9) Uploaded
This is largely the same model as used for the first production run of these products. It now includes the following changes:
- Much more pronounced latching in the front of the pad to secure it in better. (read printing instructions to ensure that you won't need supports for these)
- Completely refactored rings around the charging pads to eliminate breakage and fit better with both the JSAUX and Apple OEM pads. Prior, the rings were a bit thin for what their intended purpose which caused deformation and breakage more often than what I felt was acceptable. They are now a bit thicker. They are also slightly deeper as both pad options sat just a tiny bit proud.
- The rear support for the pads are also gonzo. Testing showed they were both not needed and made pad installation more difficult.
Version (Mk5.6) Uploaded
This is largely the same model as used for the first production run of these products. The only difference is the branding on the bottom.
Printing Instructions
The shelf and liner base should be printed in ASA, ABS, or high quality PETG. You will need some supports for the shelf.
The liner is printed in TPU.
Completed Kits are Available for Purchase
Multiple versions and colors of this product are available for purchase on OpenSourceEV Parts:
https://opensourceev.com/products/ultimate-magsafe-charging-pad-v2
Discuss This Model
The thread about this item here:
https://www.rivianforums.com/forum/threads/new-riviparts-ultimate-magsafe-charging-pad-kit.12122/