1 / 3
IO Shield for Asrock B550M Pro 4 Motherboard — zdjęcie 1
1 / 3

IO Shield for Asrock B550M Pro 4 Motherboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement IO Shield for an Asrock B550M Pro 4 Motherboard. It should snap into place on it's own.

Ocena
0 / 5
Polubienia
7
Pobrania
283
Wydruki
0
Wyświetlenia
1506
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement I/O Shield for an Asrock B550M Pro 4 Motherboard. It should snap into place on it's own.

If you wish to add metal shielding, the I/O Shield is 2" tall - the same height as 2" aluminum foil tape used for ducting. It can be applied to the back of the shield, and the holes can be cut with a small, sharp, knife. See attached photos for an example.

There are two versions of the model. 

The version with “Corner Pads” has thin pads at the corner of the object to hold it down to the build plate. They keep the corners from peeling up, and eliminate the need to print with a Brim. The pads can be easily trimmed with a utility knife, or small clippers.
 

A second version, without Corner Pads, requires no trimming, but might lift up at the corners if printed without a Brim.