Illuminated Catch-All Tray / Task Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No more groping in the dark for your stuff!
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This illuminated catch-all tray can be used as a bedside table lamp or as a task lamp for detail work, with a tray to keep all your bits in order. It uses 2 of the ubiquitous 25mm diameter LED flashlights (mine are the freebies from Harbor Freight) that clip onto the overhead arms. It prints in one piece with no supports needed, and is sized to fit the bed of a Prusa Mini+.
Printing
Print in PLA with 0.2mm layers without supports. The clips are designed for flashlights with 24.3mm diameter barrels, so before printing measure the exact diameter of your flashlights (nominal 25mm dia.) and then scale the whole thing accordingly.
Pro-Tip: The overhang on the flashlight clips is relatively steep, but if you orient the part on your bed so that the cooling fan is blowing into the overhang (i.e., the tray is facing towards the fan) you'll get cleaner printing overhangs.