1 / 2
Adhesive Mount / Holder for Knipex Steel Nose Pliers 160 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounted using VHB tape, to a smooth surface.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 103
- Wydruki
- 3
- Wyświetlenia
- 353
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (18)Powiązane
The mount utilizes VHB tape for secure attachment to a flat surface.
The images attached demonstrate the model being mounted on the inside of a cupboard door.
This design is particularly useful in shared spaces where it is important for pliers to be returned to their designated location.
The model was printed with a 0.4 mm nozzle, 30% infill, 3 wall count, and a layer height of 0.2mm. Print in orientation shown in photo 2 (blue rendering) without support.