Trayformers - The Magnetic, Reconfigurable Catch-All Tray System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular catch-all tray system that can easily be rearranged with a satisfying magnetic snap!
- Ocena
- 0 / 5
- Polubienia
- 86
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
1000s of configurations! As big or as small as you want it to be! Changing it is a snap!
This is a modular, re-arrangeable catch-all tray system that you can customize to meet your needs. Print out as many of the 6 different base pieces as you would like, and then insert inexpensive 2mm x 3mm magnets into the holes. Each piece of the tray system will magnetically snap together with a satisfying snap to create the catch-all trays that you want.
Suggested Print Settings: PLA or PETG at 0.2mm layer height. If you print with a thicker layer height, the magnets may not fit into the holes. The photos pictured here are all printed with Pearl Mouse Prusament PLA, at 0.2mm layer height.
Magnets: https://www.amazon.com/dp/B08NZTN426 - 200 3x2mm magnets for $9.99
Instructions: Each side of the tray pieces has 2 holes for magnets. The holes are sized with tight tolerances, so the magnets can be press-fitted without adhesive. Because of this, you may need to use a bit of force to push in the magnets.
When inserting the magnets, be sure to use the opposite polarity for each alternating magnet, as shown in the following diagram:
When the polarity of the magnets is set correctly, each tray piece will snap together:
