50s Gullwing Sportscar | Print-in-place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mercedes Gullwing inspired print-in-place sportscar model with rolling wheels and gullwing doors
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 638
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the legendary Mercedes 300SL “Gullwing” and the DMC DeLorean I decided to challenge myself to create a print-in-place sportscar with epic openable gullwing doors. To achieve this I used the unique capabilities of FDM 3D printing to create a moddel with print-in-place hinges, and sacrificial bridging supports!
The model features rolling wheels and Gullwing doors that open to reveal a miniature cockpit with seats. It prints with no supports and minimal post processing: Some post processing is required to open the top gullwing door, I advice to cut off the integrated supports and ply it open carefully.
The door section is the most challenging part of the print, therefore I have added a test-piece of this that you can print to make sure that it works. This will print in 2 hours, as opposed to 5 hours for the full print :)
Happy printing!