Stackable Battery Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stackable battery holder lets you stack boxes of batteries, one on top of another.
- Ocena
- 3,667 / 5
- Polubienia
- 53
- Pobrania
- 321
- Wydruki
- 11
- Wyświetlenia
- 1945
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Features
Easily wall-mounted on two screws. Stackable and will sit on a table. Three simple parts
Printing
I printed it using PLA with supports only on Base models. The layer height was set to 0.2mm.
How to Assemble
There are three sizes available. Each size has three files. Download the files for your size. I recommend printing and then hot-gluing the parts together. They are friction fit and include tabs to ensure a tight, permanent lock.
Disclaimer: This is a reupload of Adoniram's original model on Thingiverse and the CR2032 model is from KLXL.