1 / 2
Belt Clamps for Tronxy X5SA Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These clamps make adjusting the belt tension without an additional tensioner much easier than using zipties.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
These clamps make adjusting the belt tension without an additional tensioner much easier than using zipties.
You can print them without support.
You will need:
2 x M3 mold insert nut
2 x M3x10 bolt
2 x M3x12 bolt
2 x M3 nuts
Fiddling the shims between the belt and the clamp is a bit tricky, but once everything is installed, these should make your life easier.
Let me know what you think! :)