Niimbot Label Roll Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small rack to store your Niimbot labels
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a small rack to store your Niimbot labels.
I designed it for new rolls to have a tight fit, but there are no separators since I have 2 different sizes of labels.
This means that used labels will move around freely, I just squeeze them between the wall and a full roll.
Also added a small cut on the left side to store the white plastic part that has to be placed in the D101 when printing the narrower labels. This is not a tight fit, because the plastic part is not formed very convenient, but it gets the job done
Prints without support with the bottom side of the model on the build-plate
Printed in Extrudr PLA NX2 Epic Purple
→ Will fit on a Prusa Mini when turned 45°, see third picture