OMNI-DIRECTIONAL-T.I.R. CAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Omni direction wheel toy car, inspired by the movie I-Robot and shapes from the Fight of the Navigator ship
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in place with a 3 wall thickness and 5% infill, I also used a brim and 50 degree overhang supports to stop ball (wheel from moving) . I would also suggest at least 10% support as %5 was a bit messy.
Have also updated the file with 1.2 version this has a much better fitting wheel/ball.
Have left the original version just in case anyone wishes to scale it down in theory it should scale to about 30%- no longer theory :)
the model came out a lot better than i thought and you can do lots of spins, skids and drifts when pushing along check out my video