Flying V Polybar Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Flying V style guitar body for the Polybar project
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
This is a custom made frame designed as part of the Polybar PC controller project. This is designed to be printed as 4 individual pieces that slot into eachother to be glued into a single piece.
If required, the pins that connect the top/bottom to the corners can be trimmed slightly to give a more flush finish.
This has been designed to be a changable frame, using a M5x35mm screw to fix it rigidly to the Polybar frame. You may need to use a washer or 2 to pack out the distance of the screw to give a tighter fit.
Find out more about the Polybar project at:
https://github.com/roadsidebomb/Polybar-Minibar-3D-Print-Files