Case for DP30V5A-L DC-DC converter; XT60 input & output
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the DP30V5A-L. You have to bend the current shunt wire on the board (gently, with a soft item, I used a piece…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Case for the DP30V5A-L. You have to bend the current shunt wire on the board (gently, with a soft item, I used a piece of folded paper held in pliers. If you get a nick in the wire it will change the resistance.
Has a side piece with XT60 input and output (bit fiddly to get them in, solder the wires with a sharp bend so that it fits. For the new style (rounded) connectors), and also optionally one with slot for 20mm fan for the other side. If you don't need more than 1-2 amps, it should be OK without the fan.
Print the pieces on their side.