1 / 4
Tamiya Neo Fighter DT-03 - rear lower suspension arm — zdjęcie 1
1 / 4

Tamiya Neo Fighter DT-03 - rear lower suspension arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear lower suspension arm for the Tamiya DT-03 (Neo Fighter).

Ocena
0 / 5
Polubienia
22
Pobrania
97
Wydruki
0
Wyświetlenia
582
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Rear lower suspension arm for the Tamiya DT-03 (Neo Fighter). The holes for the long screws should be cleared with a 3 mm or 3.2 mm drill. Toe-in is 1.6° and should be equal to the genuine part.

There are two files available:

01 - easier to print; especialy when printing PETG at high temperature (chamfers at the big radii)

02 - more like the genuine part without the chamfers

Category: R/C Vehicles

Tagi