Box Cutter Snap-Off Blade Disposal Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple container for snap-off blades. It workes with up to 18 mm blades. Maybe 22mm will work too but since I don't…
- Ocena
- 5 / 5
- Polubienia
- 124
- Pobrania
- 754
- Wydruki
- 13
- Wyświetlenia
- 1719
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple container for snap-off blades. It workes with up to 18 mm blades.
Maybe 22mm will work too but since I don't have blades that are wider than
18 mm I can't confirm this.
The Slot is 27mm wide.
STL: There is a small and a big case and there is a lid with a slot and a lid without a slot, so it can also being used as a case only.
Use at your own risk. Even used blades are very sharp.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PETG
Category: Tools