Self-centering tapered-thread Z-axis coupling 8/5 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In this remix I changed the kind of exotic thread type of the original design, which I couldn't figure out, to a more…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
In this remix I changed the kind of exotic thread type of the original design, which I couldn't figure out, to a more common Whitworth pipe thread and added a hexagonal part in the middle so the coupler can be fastened with a wrench while tightening the nuts. I also had problems to tighten the nuts properly with the original design, which know is no problem anymore.
I guess the downside of this type of self centering coupler is that it only makes sense on a motor shaft which doesn't have a flat portion for a grub screw, which unfortunately a lot of stepper motors have.
Category: 3D Printing