Gotek external case with top mounted OLED and Blackberry Trackball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm using my Gotek in an external case, so I wanted the screen to be on the top for better readability
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I'm using my Gotek in an external case, so I wanted the screen to be on the top for better readability, I also decided to switch to using the Blackberry style trackball so put that on top too,
With both of those up there and the trackball also replacing the LED, I decided to restyle the base to take away the OLED and LED holes that I wouldn't be using.
The holes for the Blackberry trackball are lined up for the board that I bought from eBay
https://www.ebay.co.uk/itm/275370428714
but I'm guessing most would be a similar size.
The OLED is sized for the 128x32 ones - which are a fairly standard size - it includes a small bracket to hold the oled in place.
It prints easy enough on my Eryone ER20 and that's a terrible printer so it should work for most people.