1 / 3
Ergonomic Oblique Calligraphy Pen Nib Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic Oblique Calligraphy Pen Nib Holder
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 808
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (34)Powiązane
To build this nib holder, please follow below guide:
Parts or tools required:
- Oblique flange (Dip pen flange)
Go search in Ebay or AliExpress.
- 2mm Drill Bit (Optional)
- Hacksaw with nearly 1mm thick blade (Optional)
Build steps:
- Print the nib holder and get the parts. Please prevent to put supports in the slot.
- Push flange into the slot of nib holder.
- (Optional) You may need to use the 2mm Drill Bit to make the center hole larger and remove support/waste in the center hole
- (Optional) You may need to use the hacksaw to saw a little bit if there any support/waste in the slot.
- After push flange into the slot of nib holder, you can put your favorite nib and start writing!
Feel free to remix and thanks for making this.
Print Settings
Printer:
DIY 3D Printer
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
25%
Notes:
25% infill is good balance for me about the weight.
Please prevent to put supports in the slot otherwise you may need to drill and saw the slot.
Category: Art Tools