1 / 4
Sheet Holder For Prusa Enclosure — zdjęcie 1
1 / 4

Sheet Holder For Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sheet holder that mounts to a Prusa Enclosure for stability.

Ocena
5 / 5
Polubienia
21
Pobrania
119
Wydruki
1
Wyświetlenia
939
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I wanted a sheet holder that mounted to my Prusa Enclosure for stability. this mounts with M3 hardware that was included in your kit. mounts to the bottom of enclosure on either side.  No supports are needed. I printed .2 MM for quality, you can adjust as needed; however, you might want to tweak the speed as I was having a hard time getting the first lay to stay, I slowed the speed down to 98% and that seemed to help. please comment and let me know your input! (update) the update drawing, I lengthened the screw slots to increase adjustability for different location on the enclosure.  

Tagi