Steerer tube mount for Wahoo Elemnt Bolt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steerer tube mount for Wahoo computer, replaces a headset spacer above the stem.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 472
- Wydruki
- 4
- Wyświetlenia
- 3834
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got a Wahoo Elemnt Bolt to replace an old and quirky Garmin Edge 500, and discovered that although the mount looks like a Garmin mount, it's rotated 90 degrees. I had been using Bryce's Garmin stem mount and he was nice enough to rotate the mount for me, but the dimensions are also slightly different so the fit on the Wahoo was quite tight... so I wound up redesigning it. I had also seen a request for a Wahoo mount that is compatible with the Bontrager Blendr mount, so I used this basic mount design to work with both of the designs, steerer tube and Blendr mount. This one is the steerer-tube mount, it replaces a standard 1 1/8" headset spacer to mount the Wahoo over the stem.
I've printed this out (with a standard aluminum top cap) and have been using it with great results on my trail bike.
Print instructions
Supports are needed for the top of the Wahoo mount, although I have forgotten to enable them and have gotten some usable (if a little messy) prints.