1 / 5
HMG7 Neptune 3 Remix with LGX Lite Direct Drive and adjusted 5015 long ducts. — zdjęcie 1
1 / 5

HMG7 Neptune 3 Remix with LGX Lite Direct Drive and adjusted 5015 long ducts.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Remix I fabbed up quickly on Fusion360 to adjust fitment with still using strain gauge on Neptune 3.

Ocena
5 / 5
Polubienia
9
Pobrania
33
Wydruki
0
Wyświetlenia
653
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

All these files were remixed to still use the original leveling method of the Neptune 3, (strain gauge). LGX Lite Direct Drive didn't reach, so extended it out to match hole right over nozzle. With the original files of the Neptune 3 long ducts they were to far back, so moved mounting points only. Now with these adjustments cooling works perfectly. Material wise, PLA will work fine if only printing objects with PLA. Anything higher like printing PETG, ABS, and above filaments, you'll see warpage. At bare minimum make the ducts out PETG. As extra an I stacked the base cover, riser, DD mount as one for easy print also. Happy Printing.