Pully Remover Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pully Remover for Ender 3 motors
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 188
- Wydruki
- 3
- Wyświetlenia
- 734
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Pully remover for Ender 3 and alike.
All the other designs I found, where quite strict with the alignment and had a long screw.
This design allows for more manual alignment and the screw is shorter to decrease the scew.
For me it did not work. On my first try (using M4) I destroyed the threads of the nut. Then I switched to M5 but the Pulley is very very well fused.
Try to print with slight overextrusion and many walls to make the part as solid as possible. I would also suggest to use PLA.
This design uses a M5 screw. I tried M4 but the threads don't seem strong enough.