Bambu P1P - Armor X1 Top Glass Addon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips onto your existing Armor Case Mod and lets you use the X1 Top glass
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 2209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I dont have the Armor mod on my units but used the recent STEP file to design off of
Recommended Settings:
- Snug Supports /w 3 interface layers
- 4/4 top/bottom layers
- 3-4 walls
- 10-15% gyroid infil
I've attached a print file with recommended settings
it'll use minimal supports and it will just clip onto the existing frame and top mod.
some minor post processing might be required for the tolerances of some machines
I recommend using a foam or rubber carpet tape to ge between the glass and the platform where it site
i suggest printing a test piece just to verify the file and if anything needs adjusting please let me know ASAP and ill correct them
Associated files:
Hardware and Materials:
- Glass: https://ca.store.bambulab.com/products/glass-cover-plate
- 1mm foam tape or one sided rubber Carpet tape
Revisions: