Another top for the articulated jellyfish model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative top design that can be screwed onto the bottom section of the jellyfish model
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 1110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an alternative top design for the articulated jellyfish model https://www.printables.com/model/218082-articulated-jellyfish-with-ball-joint-tentacles. I originally had this as part of that model but I wanted to split it off as its own model so that I can properly comply with the licenses of the original models. This is a remix of the jellyfish air plant holder by mygeekymuse https://www.printables.com/model/62226-jellyfish-air-plant-tillandsia-holder.
Print Tips:
I have this model set with pretty tight tolerances, you may have the best results by scaling it up slightly in the x and y planes (do not scale up in the z direction or you will change the thread pitch and the model will no longer thread). As described in the other model, you should test your threads with a medium section and use that to tune what works for you and then use those settings for this top piece.
Happy printing!