1 / 7
Turret Holder for Load-Master and two Filler Braces — zdjęcie 1
1 / 7

Turret Holder for Load-Master and two Filler Braces

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Lee Load-Master turret holder attaches to the large variety of Filler Spool Holder braces.

Ocena
0 / 5
Polubienia
5
Pobrania
41
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This Lee Load-Master turret holder attaches to the large variety of Filler Spool Holder braces eg. https://www.thingiverse.com/thing:4810681. It is styled after red_rider_95's https://www.thingiverse.com/red_rider95 Lee Load-master Turret Holder https://www.thingiverse.com/thing:2854192 design that is uses compression of the layers for prevention of layer separation under load. No supports are need when printed top down. The filler mounts are spaced to be compatible with the IKEA SKADIS pegboard filler braces eg. https://www.thingiverse.com/thing:4810681.and my https://www.printables.com/model/503540-clip-on-filler-brace-for-1-wire-rack-shelf .

Revision History:

6/11/2023 - Added a shellplate holder version.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

.2

Infill: 

15% Gyroid

Notes:

Rotate the model 180 degrees around the Y axis to print top down as shown in the attached image.

 

 

Category: Tool Holders & Boxes

Tagi