3 tools (pliers) holder for HSW honeycomb storage wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 3 tools (one snipper and two pliers) for the honeycomb storage wall (HSW).
- Ocena
- 5 / 5
- Polubienia
- 155
- Pobrania
- 796
- Wydruki
- 18
- Wyświetlenia
- 2252
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This holder allows you to store 3 pliers of different sizes on the honeycomb storage wall by RostaP. I created it because almost all available holders has only 2 sections of equal width and length, whereas most sets on Amazon have 3 pieces (two pliers, one snipper) and the tools vary in width and handles diameter.
It has 3 slots of different length and width, to accommodate the 3 tools in a more or less aligned way. I modelled it using the measures from my own set (one of the cheapest on Amazon), you can find all the measures here:

I printed it with these settings and it came out great:
- Nozzle diameter 0.6 mm
- Layer height 0.3 mm
- 15% infill
- Avoid crossing perimeters
- 5mm brim
To mount it, you'll need one of the hollow inserts from the original model linked above (the single slot one is called "insert-empty.stl".