1 / 4
Spanner for self-printed Z-couplings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This are simple Open-end spanner for self-printed Z-couplings I use
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Since years I like to use this self printed Z-motor couplers with that I have good experience:
https://www.thingiverse.com/thing:1651349
So that I don't always have to use the heavy spanners from the workshop, I printed myself a few simple little spanners that are quite sufficient for the purpose.
I printed them with 70% Gyroid Infill and they are sturdy enough to tighten the coupler nuts very firmly.
If you like my design, please give it a Like and post a Make with a rating. Thanks a lot!