Sprite/ender 3 s1 extruder flat cable holder for CR10 V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder should allow you to easily remove the cable out of it if you need to take the electronic unit away
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 1197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This holder is used for holding the flat cable of a Sprite extruder (Ender3 S1 extruder) on a CR10 V3 extruder metalic plate.
If you are using a different 3D printer with a different extruder, then open up the f3d file in fuson360 and check the sizes, then do the changes you need. Please don't forget to mark it as a mix to my model.
This holder should allow you to easily remove the cable out of it if you need to take the electronic unit away.
I am still learning fusion360. The first version was fine, but I had big tolerances. I didn't bother printing a second one for me, but I made the model again and decreased the tolerances.
I also added the f3d file in case you need to modify it for your printer.
If you found it useful, then please don't forget to post some photos!