Apollo Era Launch Tower Floor Deck Plates for Levels 80 through 360 in 1/60 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are working files for size and placement only. They are for the corrected floor beam arrangements.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The floor beams and decks represented in the Fairscape1 LUT are prettu close in exterior shape and size. Unfortunately they were inaccurate in size , layout and type on the interior areas. The original floors were solid while the real tower had a open grid style structure. These deck plates when finalized will be much more accurate in both apperance and in scale measurements to the actual tower floors. There are several people working on updating the files and when all of them are published, a very accurate models of the LUT as well as the Crawler and the Saturn V/Apollo will be available.
These plates were drawn in SolidWorks and then I used Simplify3D to do the Slicing. They were printed on a Pruse I3Mk3S at .2mm layer height. No solid layers and no fill.