1 / 2
Stihl Oil & Gas Cap / Tankverschlüsse — zdjęcie 1
1 / 2

Stihl Oil & Gas Cap / Tankverschlüsse

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model in Progress For MS: 020,021,023,024,025,026,034,036,038

Ocena
0 / 5
Polubienia
32
Pobrania
476
Wydruki
1
Wyświetlenia
2183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Tankdeckel für folgende Stihl Motorsägen: MS:020,021,023,024,025,026,034,036,038

Die Dichtung sollte mit einem Weichen TPU hergestellt werden um gut abzudichten.

Nutze A70 Shore TPU.

Empfohlenes Material ist ABS bzw. ASA um die nötige Festigkeit zu erreichen.

Das Modell wurde für eine Halteklammer vorbereitet.

-------------------------------------------------------------------

Fuel tank cap for the following Stihl chainsaws: MS:020,021,023,024,025,026,034,036,038

The gasket should be made with a soft TPU to seal well.

Im using A70 Shore TPU.

Recommended material is ABS or ASA to achieve the necessary strength.

The model was prepared for a retaining clip.

 

Printer:Creality Ender 2 
Infill:30%5 Perimeter
Supports:No 
Raft:No 
Speed: slow35mm/S
Material:SmartfilASA / TPU (soft)

Tagi